Skip to main content

75th Anniversary of the Electronic Numerical Integrator and Computer (ENIAC)

caption: Kathleen Antonelli, Alyse Snyder, and Sis Stump operate the differential analyzer in the basement of the Moore School of Electrical Engineering in the years leading up to ENIAC’s construction. Circa 1942-1945.

On February 14, 1946, the world’s first general purpose electronic computer was introduced to the world. The Electronic Numerical Integrator and Computer (ENIAC), constructed at the Moore School of Electrical Engineering (now Penn’s School of Engineering and Applied Science), was touted as “an amazing machine which applies electronic speeds for the first time to mathematical tasks hitherto too difficult and cumbersome for solution.”

While the abilities of this “amazing machine” have since been surpassed by 75 years of progress in electronics and computers, ENIAC’s development was instrumental in sparking a revolution in computer science and electrical engineering that continues to this day. This lasting legacy is thanks in part to a team of women programmers who, despite their significant contributions to ENIAC’s success, were only recently recognized for their efforts.

caption: ENIAC on display at the Moore School Building in the School of Engineering  and Applied Science.

The Early Days of Computing

Before ENIAC’s time, “computers” referred to the people who worked on complex math equations. During World War II, computers relied on “function tables,” detailed information used to predict a shell’s path using metrics like air density, temperature, and wind, to calculate one part of a ballistics equation that would then be completed by a team of computers.

Starting in the late 1920s, devices known as differential analyzers were developed to help automate the process of solving the differential equations used in ballistics calculations. These wheel-and-disc devices could perform integrations, and one such device was built and used in the Moore School building in the mid-1940s to compute artillery firing tables. The challenge, explains emeritus professor Mitch Marcus, is that these devices were difficult to work with. “Setting up a problem involves putting gears of the right size together, and once you set up a problem on a differential analyzer, it’s very hard to change it,” he explains. “You program it once and get it into an alignment, but if the wheels slip then you’ve got big problems.”

ENIAC’s design and construction was financed by the U.S. Army, led by Major General Gladeon M. Barnes and was designed by engineers John Mauchly and J. Presper Eckert.

To improve upon the differential analyzer’s limitations, work on an alternative began in secret at the Moore Building in 1943. ENIAC was the fastest computational device of its time, able to do 5,000 additions per second, but because it had no internal storage, it had to be programmed manually for each new set of calculations.

The task of “programming” ENIAC was given to a group of women who had all previously been working as computers at the Moore School: Kathleen Antonelli, Jean Bartik, Frances “Betty” Holberton, Marlyn Meltzer, Frances Spence, and Ruth Teitelbaum. Although their contributions were instrumental to ENIAC’s success, their stories were nearly lost to history and only more recently was their work formally recognized.

caption: Jean Bartik (left) and Frances Spence operating the ENIAC’s main control panel. Ms. Bartik was present on the day of ENIAC’s unveiling to the world, and helped troubleshoot a switch issue the night before its unveiling, circa 1945-1947, but her efforts, and those of ENIAC’s five other women programmers, were nearly forgotten.

The “ENIAC Six” Rise to the Occasion

Kathleen Antonelli earned a degree in mathematics from Chestnut Hill College in 1942. As one of the few math majors from her class, she saw the U.S. civil service as a pathway to do work in math without becoming a teacher and was hired for a position as a computer at the Moore School.

Jean Bartik was the only mathematics major from what is now Northwest Missouri State University when she graduated in 1942. Ms. Bartik learned about the need for math-savvy individuals at Moore and came to Philadelphia toward the end of ENIAC’s construction.

Frances “Betty” Holberton, who was from Philadelphia, graduated from Penn with a degree in journalism in 1939. She also got involved working as a computer before ENIAC was built and, with Ms. Bartik, would go on to become one of its co-lead programmers.

Marlyn Meltzer was also from Philadelphia and graduated from Temple University with a degree in social studies in 1942. Because she could operate an adding machine, Ms. Meltzer was brought into the Moore School to work on weather calculations. After her unit was disbanded, she was encouraged to apply to the U.S. civil service so she could stay at Moore doing ballistics work.

Frances Spence, also born in Philadelphia, graduated from Chestnut Hill College the same year as Ms. Antonelli, who told Ms. Spence about the effort to recruit math majors to work at Penn for the U.S. Army.

Ruth Teitelbaum, from Far Rockaway Beach, New York, graduated from Hunter College with a degree in mathematics and came to the Moore School to work on ballistics calculations shortly before the ENIAC project began.

Because of the classified nature of their work, ENIAC’s six programmers only had access to blueprints and were not even allowed into the same room as the device. Despite these challenges, the women learned about ENIAC using schematics and interviews with its engineers and were able to figure out how to design algorithms and adjust ENIAC’s switches for programming calculations.

“The biggest advantage of learning the ENIAC from the diagrams was that we began to understand what it could and what it could not do. As a result we could diagnose troubles almost down to the individual vacuum tube,” Ms. Bartik told the Institute of Electrical and Electronics Engineers (IEEE) in 1996. “Since we knew both the application and the machine, we learned to diagnose troubles as well as, if not better than, the engineer.”

Computer science professor and Penn ENIAC Mini-Symposium organizer Andre DeHon says what the programmers did was far more than adjusting switches: The programmers had to develop logic behind how to program, use, and debug ENIAC, work that required a massive amount of innovation and problem solving. “Reading their stories, you realize how much they made it happen,” said Dr. DeHon. “They were handed a new field, perhaps by people who underestimated the intellectual requirements of that field, who simply said ‘We built it and you program it.’ It was more sophisticated than that, and they rose to the occasion.”

Despite the significance of the ENIAC six’s efforts in programming ENIAC, much of the early recognition and credit was given solely to Ms. Mauchly and Ms. Eckert. Then, when ENIAC was moved to Aberdeen Proving Ground, its six original programmers’ paths varied and their contributions were nearly lost to history. Thanks to Kathy Kleiman, who learned about the ENIAC six while doing research for her undergraduate thesis, the stories of the ENIAC programmers were finally brought to life and all six women were inducted into the Women in Technology Hall of Fame in 1997.

caption: Glen Beck (background) and Betty Holberton (foreground) programming the ENIAC, circa 1947-1955.

ENIAC’s Legacy, 75 Years Later

ENIAC’s introduction to the world was lauded as “birth of the computer age,” and Dr. Marcus said that ENIAC’s continued legacy is due to the programmers who developed ideas around stored programs and conditional programming that remain a cornerstone of computer science.

“The first half of every chapter is electronics and the second half is modern computer science—and these women invented it,” says Dr. Marcus. “Women rediscovered things that men forgot about, and by talking theoretically and mathematically, they abstracted all of these ideas.”

For Dr. DeHon, ENIAC’s impacts can also be found in modern-day computer science research. In his work on programmable media, architectures that resemble ENIAC processors are becoming more attractive due to the limits of Moore’s law.

More broadly, he says, “ENIAC’s legacy is this whole computerized world we have now, and the world we live in is a better place for all of the automated and computational technologies that have come out of this.”

Adapted from a Penn Today article by Erica K. Brockmeier, February 11, 2021.

Back to Top